Nikon Hong Kong Ltd.


Type of Camera	35mm single-lens reflex wth electronically and mechanically controlled focal-plane shutter
Exposure Control	Exposure compensation: Exposure compensated to (+-)2 EV in units of 1/3 EV (compensation to the + side not possible with ISO 12, and that to the - side not possible with ISO 6400
Picture Format	24 x 36mm
Lens Mount	Nikon F mount
Viewfinder	Eye-level pentaprism type
Eyepoint	14mm (at -1.0m(-1))
Focusing Screen	K3 type (splitprism-image microprism type, Clear Matte Screen II) standard, B3 type and E3 type optional
Viewfinder Frame Coverage/Magnification (with 50mm lens at infinity; -1.0 m-1)	Approx. 93% / Approx. 0.80x with 50mm lens set to infinity
Exposure Metering System	TTL center-weighted, full aperture exposure metering system, approx. 60% of the meter's sensitivity concentrated on a 12mm diameter circle
Exposure Metering Range (at normal temperature [68Â°F/20Â°C], ISO 100 equivalent, f/1.4 lens)	EV 1 - EV 20 at ISO 100 (with a 50mm f/1.4 lens)
Auto Exposure Lock	By pressing AE-L button
Shutter	Vertical-travel, metal focal plane shutter, Speed: 8 to 1/4,000s in A mode, electronic stepless control (indications are 1 to 1/4000), Manual: Bulb, 1 to 1/4000 sec., mechanical control
Accessory Shoe	Hot-shoe contact (sync contact, ready-light contact, monitor contact, stop-signal contact for TTL flash) with a lock hole to prevent accidental dropping
Sync Contact	X-contact only; synchronized with the flash at a low speed of less than 1/250 sec.
Flash Control	TTL flash: Enabled by using SB-80DX, SB-30, etc. in combination, TTL flash compensation: Compensation to -1 EV activated with the TTL flash compensation button on the camera
Flash Ready Light	Lights when the flash is fully charged with SB-80DX, SB-30, ect.; blinks for full-output warning or shutter-speed settings from 1/500 to 1/4,000 sec.
Sync Terminal	ISO519 Standard terminal, with lock screws
Self-Timer	Mechanically controlled, countdown time of approx. 4 to 10 sec., cancellation possible
Film Advance Modes	Lever provided, 30-degree standoff angle and 135-degree winding angle, automatic film advance enabled with MD-12 Motor Drive (sold separately)
Film Rewind	Film reset button and rewind crank provided
Multiple Exposure	Activated with Multiple exposure lever
Camera Back	Detachable hinged back; MF-16 Data Back can be attached in place
Power Requirements	Two 1.55V SR44 silver-oxide batteries, Two 1.5V LR44 alkaline batteries or One 3V CR-1/3N lithium battery
Tripod Socket	1/4 (ISO1222)
Dimensions	Approx. 142.5 x 90 x 58mm
Weight (without battery, memory card or body cap)	Approx. 570g (including batteries)